This simple board can be used to do some prototyping, to develop and debug aplications based on 16F84/16F628 PIC.
It contains all the necessary components such as crystal, capacitors, I/O, serial interface. So, there is no need to wire everything each time you want to practice PIC programming ! You can quickly test your piece of code.
NOTE:
This board cannot program the PIC. You should use a dedicated external programmer !
Caracteristics
- PIC 16F84/16F628
- 11 I/O configurable ports d'E/S configurables (jumpers)
- Ouput ports connected to LED
- Input ports connected to dip-switchs
- Serial RS232 or TTL port avec with 9 pin connector. RX/TX pins are using PA0 and PA1 PIC ports
- Power jack to be used with an external power supply or a battery pack (4.5V battery for example)
- Extra power connector to connect other boards
- Removable Crystal
The attached file contains all the necessary information to make you own prototyping board.
Have fun !
Buzz
